Lone Wolf Arms Ultimate Adjustable Glock Trigger, Trigger Shoe Only

6 reviews for Lone Wolf Arms Ultimate Adjustable Glock Trigger, Trigger Shoe Only

1. 

   Illanoyed – March 3, 2022

   THE GOOD: This shoe has a nice feel and definitely a shorter reset than stock. Given trigger prices these days, it's also quite economical. Once the over-travel set screw is dialed in, the break feels more crisp and solid than the stock trigger. OF CONCERN: If you may install DIY the other set screw can be positioned to provide very short pre-travel with reliable firing operation, however the gun is not drop-safe in this configuration. Externally, the trigger shoe safety is engaged, but inside, the trigger bar cruciform rests completely off the flat safety area of the trigger housing. For drop safe operation, some say the cruciform should position with no less than about 1/2 its width engaging the trigger housing safety flat. A gunsmith will recognize this during installation and adjust the shoe to safe limits.

2. 

   Native wolf – July 25, 2022

   The Lone Wolf U.A.T. trigger is fantastic with adjustable Pre-Travel & adjustable reset. The Allan screws are small and you have to be patient to adjust them but once its set it gives a nice acceptable shorter travel to a clean break & and an almost instant re-set .

3. 

   Daniel – August 4, 2022

   This trigger is smooth getting and smooth operating. I prefer this over the stock trigger ten fold. The adjustment screws did not come with my order but OP were quick to send some. Overall 10 out of 10!

4. 

   gipper – August 4, 2022

   What a great adjustable trigger, use your old arm and save $25 bucks! easy to install.My only real negative is it's pretty tough to adjust the stop because the allen head is pretty darn small, it just took a few minuets…..but it's a one time thing! This trigger feels so much better than the stock one I don't know how you could make a better $50 upgrade to your Glock.

5. 

   BarEnosh – August 4, 2022

   I have the Vanek classic trigger kit for my stock/production competition G34. It is a great trigger (pull, reset) but the pretravel is very long. As I now shoot ESP (and USPSA does away with the stock trigger restriction for Production), I was looking for an upgrade only for the trigger shoe. I found this trigger shoe and replaced the OEM shoe used for Vanek. It took me 15min to install and tune the pretravel and overtravel to my liking. Most of the pretravel from Vanek due to the OEM shoe is gone. I can fine tune the overtravel too. This UAT shoe takes the Vanek trigger to the next level. The price is quite low compared to the competitors. It would be great if lonewolf could make a flat face trigger shoe of this kind.

6. 

   Vincent – November 5, 2023

   One review sited having to disassemble the shoe for installation as a negative. Actually while the instructions are spotty at best beging able to disassemble the shoe is an advantage as you don't have to guess where the pin inserts into the trigger bar. The tricky part is understanding how to insert the spring and get it to lock in, but it isn't that difficulty. It just takes a bit of dexterity.Adjusting over-travel is a matter of taking as much of the overtravel out as you can while maintaining a CLEAN break. Pre-travel can be more sensitive because you don't want to take so much out as to have the trigger bar begin to engage the safety plunger in the slide. Just leave enough pre-travel in the shoe so that it has SOME travel before hitting the wall and the break. With both pre and overtravel adjustments you can shorten the stroke quite a bit, so use common sense to make sure you don't put your weapon in a situation where it might fire before you intend it to.One of the pros of the shoe itself is the contour. It is probably what the Glock OEM shoe should have been.